TECHNOLOGICAL APPROACHES FOR PRODUCING ACTIVATED CARBON ADSORBENTS FROM PAULOWNIA TOMENTOSA BIOMASS: COMPARATIVE ANALYSIS OF STEAM AND MICROWAVE ACTIVATION METHODS
Keywords:
Paulownia tomentosa, activated carbon, biomass valorization, steam activation, microwave activation, porous carbon materials, adsorption technology, sorption materials.Abstract
The development of sustainable and high-performance adsorbents from renewable biomass resources has become an important research direction in modern environmental and adsorption technologies. In this study, Paulownia tomentosa wood waste was investigated as a renewable precursor for the production of activated carbon adsorbents. Two activation approaches, namely conventional steam activation and non-conventional microwave activation, were comparatively evaluated in terms of technological efficiency, structural development, and adsorption performance. The proposed technology consists of biomass preparation, drying, size reduction, pyrolysis under an inert atmosphere, followed by either steam or microwave activation. The influence of activation conditions on pore development, carbonization degree, and adsorption characteristics was investigated. Structural and physicochemical properties of the obtained adsorbents were evaluated using adsorption methods, FTIR spectroscopy, SEM, TEM, EDS, and XRD analyses. The results demonstrated that both activation approaches produced highly porous carbon structures; however, microwave activation significantly reduced processing time and energy consumption while maintaining comparable adsorption properties. The obtained activated carbons exhibited a well-developed porous structure, oxygen-containing functional groups, and a highly carbonized matrix, making them promising candidates for adsorption applications. The developed technology provides a scientific basis for the utilization of Paulownia biomass as a low-cost renewable precursor for advanced sorption materials.
References
1.Marsh H., Rodríguez-Reinoso F. Activated Carbon. Amsterdam: Elsevier Science, 2006. 536 p.
2.Bansal R.C., Goyal M. Activated Carbon Adsorption. Boca Raton: CRC Press, 2005. 520 p.
3.Yang K., Peng J., Srinivasakannan C., Zhang L., Xia H., Duan X. Preparation of high surface area activated carbon from coconut shells using microwave heating. Bioresource Technology. 2010, 101(15), pp. 6163–6169.
4.Ioannidou O., Zabaniotou A. Agricultural residues as precursors for activated carbon production—A review. Renewable and Sustainable Energy Reviews. 2007, 11(9), pp. 1966–2005.
5.Lua A.C., Yang T. Characteristics of activated carbons prepared from pistachio-nut shells by physical activation. Journal of Colloid and Interface Science. 2004, 274(2), pp. 594–601.
6.Ahmad A.A., Hameed B.H., Aziz N. Adsorption of direct dye on palm ash: kinetic and equilibrium modeling. Journal of Hazardous Materials. 2007, 141(1), pp. 70–76.
7.Gupta V.K., Suhas. Application of low-cost adsorbents for dye removal—A review. Journal of Environmental Management. 2009, 90(8), pp. 2313–2342.
8.Tan I.A.W., Ahmad A.L., Hameed B.H. Preparation of activated carbon from coconut husk: Optimization study on removal of 2,4,6-trichlorophenol using response surface methodology. Journal of Hazardous Materials. 2008, 153(1–2), pp. 709–717.
9.Foo K.Y., Hameed B.H. Insights into the modeling of adsorption isotherm systems. Chemical Engineering Journal. 2010, 156(1), pp. 2–10.
10.Jumayeva D.J., Abdurakhimov A.Kh., Abdurakhimov Kh.A., Eshmetov I.D., Rakhmatullaeva N.T. Technologies for Producing Adsorbents Based on Paulownia Wood. Monograph. Tashkent, 2023. 170 p.
11.Jumayeva D.J., Abdurakhimov A.Kh., Abdurakhimov Kh.A., Rakhmatullaeva N.T., Toirov O. Energy of adsorption of an adsorbent in solving environmental problems. E3S Web of Conferences. 2021, 288, 01082.
12.Jumayeva D.J., Toirov O., Akhmedov R., Rakhmatullaeva N.T., Eshmetov I.D. Energy of adsorption of polar molecules on NaLSX zeolite. E3S Web of Conferences. 2021, 288, 01041.
13.Jumayeva D.J., Rakhmatullaeva N.T., Toirov O.Z., Numonov B., Shamuratova M.R. Obtaining of highly energy-efficient activated carbons based on wood. E3S Web of Conferences. 2023, 410, 01018.
14.Jumayeva D.J., Rakhmatullaeva N.T., Shamuratova M.R., Bakhronov Kh.N., Rakhimov U.Yu. Differential heats of adsorption of water vapor on an adsorbent obtained from wood waste. Universum: Chemistry and Biology. 2022, 9(99).
15.Abdurakhimov A.Kh., Jumayeva D.J., Abdurakhimov Kh.A., Rakhmatullaeva N.T., Eshmetov I.D. Technology for purification of water–alcoholic solutions with wood-based adsorbents. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, pp. 96–102.
16.Jumaeva D.J., Rakhmatullaeva N.T., Shamuratova M.R., Abdurakhimov A.Kh., Ergashev O.K. Methods of activation of Paulownia wood waste. Mechanics and Technology. 2022, 3(3).
17.Jumaeva D.J., Rakhmatullaeva N.T., Abdurakhimov A.A., Babaeva G.O. Investigation of physicochemical characteristics of wood-based adsorbents. Universum: Chemistry and Biology. 2023, 4(106).
18.Sevilla M., Fuertes A.B. Sustainable porous carbons with a superior performance for CO₂ capture. Energy & Environmental Science. 2011, 4, pp. 1765–1771.
19.Li W., Yang K., Peng J., Zhang L., Guo S., Xia H. Effects of carbonization temperatures on characteristics of porosity in coconut shell chars and activated carbons derived from carbonized coconut shell chars. Industrial Crops and Products. 2008, 28(2), pp. 190–198.
20.Hameed B.H., Ahmad A.A., Aziz N. Isotherms, kinetics and thermodynamics of acid dye adsorption on activated palm ash. Chemical Engineering Journal. 2007, 133(1–3), pp. 195–203




United Kingdom
Germany
France
Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo
Italy
Spain
Poland
Netherlands
Belgium
Sweden
Norway
Finland
Denmark
Switzerland
Austria
Czech Republic
Hungary
Romania
Bulgaria
Greece
Portugal