STRENGTH OF NON-AUTOCLAVED FOAM CONCRETE REINFORCED WITH MINERAL MODIFIERS

Authors

  • Orzimatova Muazzam Faxridin qizi Stajyor-tadqiqotchi Author
  • Tuxtabayev Axmedjon Adashevich texnika fanlari nomzodi (t.f.n.), professor Author

Keywords:

non-autoclaved foam concrete, mineral modifiers, silica fume, metakaolin, fly ash, compressive strength, lightweight concrete, pore structure, cement hydration, sustainable construction.

Abstract

Non-autoclaved foam concrete has become an increasingly attractive construction material because of its low density, excellent thermal insulation properties, and cost-effective production process. However, its relatively low compressive strength limits its application in structural engineering. The present study aimed to investigate the influence of selected mineral modifiers on the compressive strength and physical properties of non-autoclaved foam concrete. Experimental mixtures incorporating silica fume, fly ash, and metakaolin were prepared in various proportions and compared with a control mixture without mineral additives. Mechanical and physical properties, including compressive strength, dry density, water absorption, and pore characteristics, were evaluated after standard curing periods. The experimental results demonstrated that mineral modifiers significantly improved the structural performance of foam concrete by enhancing cement hydration, reducing porosity, and increasing matrix density. The combined use of silica fume and metakaolin produced the highest compressive strength while maintaining low density and improved durability-related properties. Statistical analysis confirmed significant differences between the control and modified mixtures, indicating the effectiveness of mineral modification in improving engineering performance. The findings suggest that optimized mineral-modified non-autoclaved foam concrete can be successfully applied as a lightweight, durable, and environmentally sustainable construction material for modern building applications.

References

1.Neville AM. Properties of Concrete. 5th ed. Pearson Education; 2011. ISBN: 9780273755807.

2.Hewlett PC, Liska M, editors. Lea's Chemistry of Cement and Concrete. 5th ed. Butterworth-Heinemann; 2019. ISBN: 9780081007730.

3.Jones MR, McCarthy A. Cellular Concrete: Engineering and Technology. CRC Press; 2016. ISBN: 9781498701297.

4.ASTM International. ASTM C796/C796M-19. Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam. West Conshohocken, PA; 2019.

5.ASTM International. ASTM C495/C495M-12. Standard Test Method for Compressive Strength of Lightweight Insulating Concrete. West Conshohocken, PA.

6.American Concrete Institute. Use of Fly Ash in Concrete. Farmington Hills, MI: American Concrete Institute.

7.Kadri EH, Duval R. Effect of silica fume on the properties of fresh and hardened concrete. Construction and Building Materials. 2009;23(8):3084-3089. DOI: 10.1016/j.conbuildmat.2009.02.005

8.Siddique R. Utilization of silica fume in concrete: Review of hardened properties. Resources, Conservation and Recycling. 2011;55(11):923-932. DOI: 10.1016/j.resconrec.2011.06.012

9.Madandoust R, Mousavi SY. Fresh and hardened properties of self-compacting concrete containing metakaolin. Construction and Building Materials. 2012;35:752-760. DOI: 10.1016/j.conbuildmat.2012.04.013

10.Justnes H. A review of pozzolans for use in concrete. Cement and Concrete Composites. 2015;58:1-8. DOI: 10.1016/j.cemconcomp.2015.02.006

11.Kearsley EP, Wainwright PJ. The effect of porosity on the strength of foamed concrete. Cement and Concrete Research. 2002;32(2):233-239. DOI: 10.1016/S0008-8846(01)00641-3

12.Hilal AA, Thom NH, Dawson AR. On the performance of foamed concrete. Construction and Building Materials. 2015;75:313-332. DOI: 10.1016/j.conbuildmat.2014.11.012

Downloads

Published

2026-06-08