RESOURCE-SAVING TECHNOLOGY FOR INCREASING THE LIFE OF BALL BEARING FIXED JOINTS OF TRACTORS AND AUTOMOBILES
Keywords:
tension, fixed joint, bearing, service life, strength, crevice, fretting-corrosion, galvanic coating, oil, service life, friction coefficient.Abstract
The article shows that the premature failure of a fixed assembly with a ball bearing in agricultural machinery is due to the elliptical shape of the outer ring of the bearing, which leads to an incorrect distribution of the force acting on it between the balls, which leads to a decrease in its service life. At the same time, the factors affecting the strength of a fixed assembly with a ball bearing when the diameter of the covering part is smaller than the diameter of the covered part (non-lubricated assembly) is lost using a press force are studied, and the main method of increasing the friction force is selected. The effect of using heating the covering part or cooling the covered part, applying a galvanic coating to the surfaces of the assembly and other methods is presented. However, due to the complexity of the proposed methods, the need for expensive equipment and the long recovery time, a simple, inexpensive, non-complex technology for increasing the friction coefficient, the technology of using anaerobic sealants, is presented.
References
1.Zafar Batirov, Ilhom Toirov, and Tura Razzakov. Technology of ridge formation on cotton fields with simultaneous fertilization. E3S Web of Conferences 365, 04008 (2023)
2.Ilxom Toirov, Zafar Batirov and Ergash Sharipov. Theoretical prerequisites for improving durability of fixed rolling bearing joints restored with anaerobic. E3S Web of Conferences 365, 04020 (2023)
3.Батиров З.Л., Тоиров И.Ж., Абдиев А.А., Мукимов Б.Р. Технология формирования гребней на полях из-под хлопчатника с одновременным внесением удобрений. Вестник науки и образования № 6 (126). Часть 1 2022.
4.Ли Р.И., Мельников А.Ю., Тоиров И.Ж. Перспективный эластомерный нанокомпозит восстановления изношенных корпусных деталей автомобилей. Сборник статей международной научно-практической конференции. Липеск, 2022, 292-298 с.
5.Mamatov F.M., Batirov Z.L., Toirov I.J. Dalalarda pushtalar hosil qilish bilan bir vaqtda o'g'it solish mashinasi parametrlarini asoslash. Innovatsion texnologiyalar 3-son, 2022, 65-70 b.
6.З.Л. Батиров, И.Ж. Тоиров. Тяговое Сопротивление рыхлителя с тукопроводом-распределителем. Техническое обеспечение инновационных технологий в сельском хозяйстве. Сборник научных статей международной научно-практической конференции (Минск, 24-25 ноября 2022 года). С. 195-198
7.Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs // IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. United Kingdom, 2021. doi: 10.1088/1757-899X/1030/1/012135.
8.Ravshanov H, Babajanov L., Kuziyev Sh, Rashidov N, Kurbanov Sh. Plough hitch parameters for smooth tail // IOP Conf Series: Materials Science and Engineering 883(2020) 012139. United Kingdom, 2020. doi: 10.1088/1757-899X/883/1/012139.
9.Kiyamov, M.Khakimova, M.Ochilova, T.Razzakov, F.Begimkulov. Roller-combing machine for preparation of combs // AGRITECH-VIII 2023E3S Web of Conferences 390, 01037 (2023) https://doi.org/10.1051/e3sconf/202339001037
10.Mamatov F., Umurzakov U., Mirzaev B., Rashidov N.. Eshchanova G and Avazov I. Physical-mechanical and technological properties of eroded soils // E3S Web of Conferences 264, 04065 (2021). - France, 2021. doi.org/10.1051/e3sconf/202126404065.
11.Джураев, Джума, Илхом Жураевич Тоиров, and Сунатулло Мамадиевич Бадалов. "Разработка прицепного штангового опрыскивателя SHPJG-20 для химической обработки растений хлопчатника." Наука в центральной России 5 (2020): 52-58 с.
12.Тоиров Илхом Жураевич. "Исследование термомеханических характеристик анаэробных герметиков." Проблемы науки 1 (82) (2024): 16-18 с.
13.Batirov, Z., Toirov, I., Razzakov, T. Technology of ridge formation on cotton fields with simultaneous fertilization, E3S Web of Conferences, 2023, 365, 04008.
14.Kiyamov, A., Norchayev, D., Razzakov, T. Parameters of the comb-forming machine with elastic rods, E3S Web of Conferences, 2021, 264, 03036.
15.[1] Djurayev D., Toirov I., Murodov L., Xalilov M. O sozdanii universalnogo podvesnogo opriskivatelya PJG 10, kotoriy ximicheski obrabativayet sadi i vinogradniki, Jurnal innovatsionnix texnologiy, 2018. - №2. - S.28-35.




United Kingdom
Germany
France
Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo
Italy
Spain
Poland
Netherlands
Belgium
Sweden
Norway
Finland
Denmark
Switzerland
Austria
Czech Republic
Hungary
Romania
Bulgaria
Greece
Portugal