SYNTHESIS OF GRANULATED CARBON–MINERAL SORBENTS FROM LOCAL RAW MATERIALS

Authors

  • Karimova Zarifa Umarovna , Аzimova Durdona Abdulloevna Nurmurodov Tulkin Isamurodovich Navoi State University of Mining and Technologies, Navoi, Uzbekistan. Author
  • Karshiev Bekzod Nosirovich PhD Researcher, Senior Researcher, Institute of General and Inorganic Chemistry, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan. Author
  • Аkhmedova Dilbar Makhmudovna Head of Laboratory. G-Test LLC, Tashkent, Uzbekistan Author

Keywords:

granulated sorbent; carbon-mineral composite; Angren kaolin; Krantau glauconite; metakaolin; geopolymer binder; heavy metals; sorption capacity; sorption selectivity; multi-criteria optimization.

Abstract

 This study investigates the design of granulated carbon-mineral sorbents based on a carbon sorbent derived from fruit stone waste (CS), multicolored kaolin from the Angren deposit, and glauconite from the Krantau deposit. A review of the relevant literature established that firing carbon-containing granules in an oxidizing (air) atmosphere is fundamentally unsuitable because it causes carbon combustion and deterioration of the sorbent structure. Therefore, low-temperature geopolymerization was selected as the binder-forming approach to ensure the mechanical integrity of the granules while preserving the carbon phase. An experimental design matrix comprising eleven compositions (G-1 to G-11) was developed within the CS-metakaolin-activated glauconite system. For each formulation, the specific surface area, cation exchange capacity, compressive strength, abrasion resistance, equilibrium sorption time, and sorption capacities toward five heavy metal ions (Cu2+, Pb2+, Cd2+, Zn2+, and Ni2+) were evaluated using a calculation-based predictive approach. The results indicate that the incorporation of 30 wt.% mineral components reduces the sorption capacity by only 24-25%, demonstrating that the loss of adsorption performance proceeds more slowly than the increase in mineral content. Furthermore, the selectivity sequence remained unchanged for all investigated compositions and followed the order Pb2+> Cu2+ > Cd2+ > Ni2+ ≈ Zn2+. Based on a multi-criteria assessment, composition G-3 (80:20:0) was identified as the optimum formulation for the treatment of wastewater containing a single heavy metal, whereas composition G-8 (70:10:20) exhibited the most favorable performance for multicomponent industrial wastewater. It should be emphasized that the numerical values presented in this study represent calculation-based model predictions and require experimental validation.

References

1.Activated carbon and clay pellets coated with hydroxyapatite for heavy metal removal. Materials, 2023, 16 (9), Article 3605.

2.Kaolinite-composited biochar and hydrochar for Pb, Cu, Cd and Zn removal. Sustainability, 2023, 15 (22), Article 15978.

3.Corning Inc. Activated carbon bodies having clay binder and method of making same. US Patent 5,488,021 A, 1996.

4.Preparation of granular activated carbons using various binders. Proceedings, 2020, 51 (1), Article 27.

5.Enhanced mechanical stability with hierarchical porosity of activated carbon pellets via combined polymer binders. Journal of the Korean Ceramic Society, 2024, 61, pp. 448-460.

6.Alkali-activated metakaolin as a zeolite-like binder for the production of adsorbents. Inorganics, 2019, 7 (12), Article 141.

7.Alkali-activated zeolite 4A granules: Characterization and suitability assessment for adsorption. Crystals, 2021, 11(4), Article 360.

8.Aimurzaeva, L.G., Zhumasva, D.Zh., Eshmetov, I.D., et al. Mineralogical composition and physicochemical characteristics of kaolins from the Angren deposit. Universum: Chemistry and Biology, 2022, No. 14219.

9.Characteristics, composition and properties of Angren kaolin grade AKF-78. Universum: Technical Sciences, 2019, No. 8517.

10.Coles, C.A., Yong, R.N. Aspects of kaolinite characterization and retention of Pb and Cd. Applied Clay Science, 2002, 22, pp. 39-45.

11.Kaolinite: Surface area, cation exchange capacity and point of zero charge. Molecules, 2024, 29(9), Article 2135.

12.Adsorption of Pb(II), Cu(II) and Zn(II) onto natural kaolinite: Kinetics and isotherms. Scientific Reports, 2022, 12, Article 16033.

13.Preparation of metakaolin-based adsorbents: Calcination conditions and adsorption performance. Journal of Environmental Protection, 2014,5, pp.1-12.

14.Removal of Cu(II) by metakaolin-based alkali-activated materials. Materials, 2023, 16 (3), Article 1221.

15.Metakaolin geopolymers for heavy metal and caesium sorption. Journal of Umm Al-Qura University for Applied Sciences, 2025. DOI: 10.1007/s43994-025-00281-y.

16.Franus, W., et al. Removal of heavy metal ions from aqueous solutions using glauconite. Minerals, 2019, 9 (8), Article 470.

17.Glauconite: Crystal chemistry, structure and industrial application. Minerals, 2023, 13 (9), Article 1228.

18.Zhumagaziev, A., Kenzhebay, R., Kurbaniyazov, S., Shoimurotov, T. Glauconite deposits of Uzbekistan: Reserves, properties and prospects of utilization. Mining Journal of Kazakhstan, 2025, No. 8, pp. 26-34.

19.Umirova, N. Utilization of glauconite from the Krantau deposit for purification of wastewater and drinking water. E3S Web of Conferences, 2020, 216, Article 01147.

Downloads

Published

2026-05-28