INCREASING THE ADAPTABILITY OF ORGANIC PHOTOCELLS

Based on the review of Professor M.Kurbanov

Authors

  • Jalolova Pokiza M. Professor of Shahrisabz State Pedagogical Institute, Pfd(DSc), Professor Author

Keywords:

polymer, PM6, donor, acceptor, insulation, photovoltaic, mechanical flexibility.

Abstract

 discusses methods for improving the excellent mechanical flexibility of organic photovoltaics . Current strategies aimed at improving the mechanical stability of film-based polymer photovoltaic systems are presented, as demonstrated by a selection of relevant examples using PM6-based systems. General methods for introducing third components, including novel polymer donors/acceptors and isolated polymers, to improve the stretchability are explored .

References

1.Park JS, Kim GU, Lee S, et al. Material design and device fabrication strategies for stretchable organic solar cells. Adv Mater, 2022, 34:2201623

2.2 . Qin J, Lan L, Chen S, et al. Recent progress in flexible and stretchable organic solar cells. Adv Funct Mater, 2020, 30: 2002529

3.3 . Li Y, Xu G, Cui C, et al. Flexible and semitransparent organic solar cells. Adv Energy Mater, 2018, 8: 1701791

4.4 . Lee C, Lee S, Kim GU, et al. Recent advances, design guidelines, and prospects of all-polymer solar cells. Chem Rev, 2019, 119: 8028–8086

5.5 . Xie C, Jiang X, Zhu Q, et al. Mechanical robust flexible single-component organic solar cells. Small Methods, 2021, 5: e2100481

6.6 . Xie C, Xiao C, Fang J, et al. Core/shell AgNWs@SnO x electrodes for high performance flexible indoor organic solar cells with >25% efficiency. Nano Energy, 2023, 107: 108153

7.7 . Huang S, Qian C, Liu X, et al. A review on flexible solar cells. Sci China Mater, 2024, 67: 2717–2736

8.8 . Fu J, Yang Q, Huang P, et al. Rational molecular and device design enables organic solar cells approaching 20% efficiency. Nat Commun, 2024, 15:1830

9.9 . Lee JW, Sun C, Lee J, et al. Design of star-shaped trimer acceptors for high-performance (efficiency > 19%), photostable, and mechanically robust organic solar cells. Adv Energy Mater, 2024, 14: 2303872

10.10. Kim T, Kim JH, Kang TE, et al. Flexible, highly efficient all-polymer solar cells. Nat Commun, 2015, 6: 8547

11.11. Zhang J. et al. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors //Nature Energy. - 2018. - T. 3. - no. 9. - S. 720-731.

12.12. Duane L. et al. Trade-off between exciton dissociation and carrier recombination and dielectric properties in Y6-sensitized nonfullerene ternary organic solar cells //Energy Technology. - 2020. - T. 8. - no. 1. - S. 1900924.

13.13. Duane L. et al. Non-fullerene-derivative-dependent dielectric properties in high-performance ternary organic solar cells //IEEE Journal of Photovoltaics. - 2019. - T. 9. - no. 4. - S. 1031-1039.

14.14. Kang H. et al. Bulk-heterojunction organic solar cells: five core technologies for their commercialization //Advanced Materials. - 2016. - T. 28. - no. 36. - S. 7821-7861.

15.15. Du X. et al. Efficient polymer solar cells based on non-fullerene acceptors with potential device lifetime approaching 10 years //Joule. - 2019. - T. 3. - no. 1. - S. 215-226.

Downloads

Published

2026-09-09