DEVELOPMENT OF METHODS FOR EXTRACTING LIQUID FROM JERUSALEM ARTICHOKE TUBERS WITH HIGH MOISTURE CONTENT

Authors

  • Beshimov Murodjon Xamidjonovich Bukhara State Technical University image/svg+xml Author

Keywords:

Jerusalem artichoke, Helianthus tuberosus L., liquid extraction, juice extraction, inulin, mechanical pressing, moisture content, extraction yield, tuber processing.

Abstract

The high moisture content of freshly harvested tubers, while advantageous for juice extraction, also contributes to rapid deterioration and limits long-term storage. The development of efficient methods for extracting liquid from Jerusalem artichoke tubers can therefore provide an opportunity to obtain a valuable liquid fraction while simultaneously increasing the utilization of the crop. This study considers the development and technological evaluation of methods for extracting liquid from fresh Jerusalem artichoke tubers. The proposed methodology includes raw-material preparation, washing, crushing, mechanical pressing, filtration, and, where appropriate, enzymatic or combined treatment. The principal quality parameters include extraction yield, moisture content, soluble solids, pH, titratable acidity, color, turbidity, and inulin concentration. Mechanical pressing, centrifugal separation, and enzymatic pretreatment are considered as potential extraction approaches. The efficiency of the process is expected to depend on particle size, pressing pressure, temperature, pretreatment conditions, and the structural characteristics of the tubers. Development of an optimized extraction process could facilitate the production of Jerusalem artichoke juice or liquid extract suitable for subsequent concentration, fermentation, functional food production, or recovery of valuable soluble compounds.

References

1.Kays, S. J., & Nottingham, S. F. (2008). Biology and Chemistry of Jerusalem Artichoke: Helianthus tuberosus L. CRC Press.

2.Roberfroid, M. B. (2005). Introducing inulin-type fructans. British Journal of Nutrition, 93(S1), S13–S25.

3.Franck, A. (2002). Technological functionality of inulin and oligofructose. British Journal of Nutrition, 87(S2), S287–S291.

4.Van Loo, J., Coussement, P., de Leenheer, L., Hoebregs, H., & Smits, G. (1995). On the presence of inulin and oligofructose as natural ingredients in the Western diet. Critical Reviews in Food Science and Nutrition, 35(6), 525–552.

5.Fellows, P. J. (2017). Food Processing Technology: Principles and Practice (4th ed.). Woodhead Publishing.

6.Toledo, R. T. (2007). Fundamentals of Food Process Engineering (3rd ed.). Springer.

7.McCabe, W. L., Smith, J. C., & Harriott, P. (2005). Unit Operations of Chemical Engineering (7th ed.). McGraw-Hill.

8.Ranganna, S. (1986). Handbook of Analysis and Quality Control for Fruit and Vegetable Products (2nd ed.). Tata McGraw-Hill.

9.Brennan, J. G. (2006). Food Processing Handbook. Wiley-VCH.

10.Krokida, M. K., Karathanos, V. T., Maroulis, Z. B., & Marinos-Kouris, D. (2003). Drying kinetics of some vegetables. Journal of Food Engineering, 59(4), 391–403.

11.Lewicki, P. P. (1998). Some remarks on rehydration of dried foods. Journal of Food Engineering, 36(1), 81–87.

12.Sablani, S. S. (2006). Drying of fruits and vegetables: Retention of nutritional/functional quality. Drying Technology, 24(2), 123–135.

Downloads

Published

2026-09-10