ENERGY EFFICIENCY AND ENVIRONMENTAL ADVANTAGES OF BITUMEN EMULSIONS: A LITERATURE REVIEW
Keywords:
bitumen emulsion, hot asphalt, toxic gases, CO2 emissions, energy efficiency, road construction materialsAbstract
This article, based on a review of scientific literature, highlights the advantages of bitumen emulsions over hot bitumen binders and hot-mix asphalt technologies. This review comparatively examines the production and application temperatures, energy consumption, and atmospheric emissions of toxic gases (CO2, SO2, volatile organic compounds, and polyaromatic hydrocarbons) for both technologies. The analysis indicates that bitumen emulsions, due to their application at low temperatures (20–60°C), can reduce energy consumption by 35–50%, carbon dioxide emissions by 40–60%, and sulfur dioxide emissions almost entirely (≈99.9%). Furthermore, low operating temperatures significantly reduce toxic emissions that affect the health of workers during the preparation and laying of road surfaces. The article also provides information on the main materials used in the production of bitumen emulsions - bitumen, water, emulsifiers and stabilizing additives.
References
1.Al-Mohammedawi, A., & Mollenhauer, K. (2022). Current research and challenges in bitumen emulsion manufacturing and its properties. Materials, 15(6), 2026. https://doi.org/10.3390/ma15062026
2.Rubio, M. C., Martínez, G., Baena, L., & Moreno, F. (2012). Warm mix asphalt: An overview. Journal of Cleaner Production, 24, 76-84. https://doi.org/10.1016/j.jclepro.2011.11.053
3.del Carmen Rubio, M., Moreno, F., Martínez-Echevarría, M. J., Martínez, G., & Vázquez, J. M. (2013). Comparative analysis of emissions from the manufacture and use of hot and half-warm mix asphalt. Journal of Cleaner Production, 41, 1-6. https://doi.org/10.1016/j.jclepro.2012.09.036
4.Leng, Z., Yu, H., Zhang, Z., & Tan, Z. (2017). Optimizing the mixing procedure of warm asphalt rubber with wax-based additives through mechanism investigation and performance characterization. Construction and Building Materials, 144, 291-299. https://doi.org/10.1016/j.conbuildmat.2017.03.208
5.Jamshidi, A., Hamzah, M. O., Kurumisawa, K., Nawa, T., & Samali, B. (2016). Evaluation of sustainable technologies that upgrade the binder performance grade in asphalt pavement construction. Materials & Design, 95, 9-20. https://doi.org/10.1016/j.matdes.2016.01.065
6.Jamshidi, A., Hamzah, M. O., & You, Z. (2013). Performance of warm mix asphalt containing Sasobit®: State-of-the-art. Construction and Building Materials, 38, 530-553. https://doi.org/10.1016/j.conbuildmat.2012.08.015
7.Cui, P., Schito, G., & Cui, Q. (2020). VOC emissions from asphalt pavement and health risks to construction workers. Journal of Cleaner Production, 244, 118757. https://doi.org/10.1016/j.jclepro.2019.118757
8.Dulaimi, A., Al Busaltan, S., Mydin, M. A. O., Lu, D., Özkılıç, Y. O., Jaya, R. P., & Ameen, A. (2023). Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material. Scientific Reports, 13, 17380. https://doi.org/10.1038/s41598-023-44630-5
9.Malik, M. D., Chen, Y., Mu, J., & Dong, R. (2025). Sustainable cold mix asphalt: A comprehensive review of mechanical innovations, circular economy integration, field performance, and decarbonization pathways. Materials, 18(23), 5452. https://doi.org/10.3390/ma18235452




United Kingdom
Germany
France
Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo
Italy
Spain
Poland
Netherlands
Belgium
Sweden
Norway
Finland
Denmark
Switzerland
Austria
Czech Republic
Hungary
Romania
Bulgaria
Greece
Portugal