STATISTICAL CONTROL OF DEFECT FREQUENCY IN KNITWEAR PRODUCTION USING A U-CONTROL CHART

Authors

  • A.A. Abdumalikov State Institution “Uzbekistan Scientific Testing and Quality Control Center” Author
  • J.I. Oripov Fergana State Technical University, Department of Light Industry Engineering Author
  • U.S.Quryazov Urganch State University Author

Keywords:

statistical process control, u-chart, control limits, Pareto analysis, yarn tension, process capability, Cpk, knitting

Abstract

The paper proposes a statistical process control model for knitting production based on data collected by an intelligent monitoring system. Since the sample size varies from shift to shift, a u-chart is justified for monitoring defect frequency, and its limits (UCL = 8.6; LCL = 1.0 events/100 m) are calculated. Pareto analysis showed that 80.4 % of defects belong to three classes. A regression relationship between yarn tension and defect frequency (R2 = 0.89) was used to justify the target value of the control chart, T ≈ 23 cN; the process capability index Cpk increased from 0.74 to 1.21.

References

1.Montgomery D.C. Introduction to Statistical Quality Control. – 8th ed. – Hoboken: Wiley, 2019. – 768 p.

2.Ngan H.Y.T., Pang G.K.H., Yung N.H.C. Automated fabric defect detection – A review // Image and Vision Computing. – 2011. – Vol. 29, № 7. – P. 442–458.

3.Jocher G., Chaurasia A., Qiu J. Ultralytics YOLOv8 [Electronic resource]. – 2023. – URL: https://github.com/ultralytics/ultralytics.

4.Juran J.M., Godfrey A.B. Juran’s Quality Handbook. – 5th ed. – New York: McGraw-Hill, 1999.

5.Deming W.E. Out of the Crisis. – Cambridge: MIT Press, 1986.

6.O‘z DSt ISO 9001:2015. Quality management systems. Requirements. – Tashkent: Uzstandard Agency.

7.Spencer D.J. Knitting Technology: A Comprehensive Handbook and Practical Guide. – 4th ed. – Cambridge: Woodhead Publishing, 2020. – 550 p.

8.Montgomery D.C. Design and Analysis of Experiments. – 10th ed. – Hoboken: Wiley, 2019. – 688 p.

9.Angelova R.A. Intelligent automation in knitting manufacturing: advanced study of flat knitting machines // Applied Sciences. – 2025. – Vol. 15, № 10. – Article 5775.

10.Tukhtasinov R., Kholmatova M. Smart monitoring of knitting machines in Uzbekistan industry // Uzbek Textile Journal. – 2023. – No. 2. – P. 19–28.

Downloads

Published

2026-05-31