INVESTIGATION OF THE MECHANISM OF MOLYBDENITE OXIDATION BY NITRIC ACID
Keywords:
molybdenite; MoS₂; nitric acid; oxidation; mechanism; kinetics; passivation; hydrometallurgy; molybdic acid; molybdenum oxide; sulfuric acid; sulfide ores.Abstract
This paper provides a detailed examination of the oxidation of molybdenite (MoS₂) by nitric acid. It explains how molybdenite interacts with the acid, which chemical reactions occur at different stages of the process, and which substances are formed as a result. Particular attention is paid to the conversion of sulfur, which is part of molybdenite, into oxidized compounds, as well as to changes in the chemical state of molybdenum during the reaction. The influence of the main technological parameters on the oxidation rate is also analyzed. The paper considers how changes in nitric acid concentration, process temperature, and ore particle size affect the completeness of reagent interaction and the degree of molybdenum extraction. In general, an increase in temperature and a decrease in particle size accelerate the reaction because they improve the conditions for interaction between the acid and the mineral surface. However, the specific effect depends on the ore composition and process conditions. The formation of intermediate compounds that appear during oxidation and may affect the subsequent course of the reaction is also considered. In addition, the passivation of the molybdenite surface is examined. This phenomenon involves the formation of a layer of reaction products on the particle surface, which hinders access of nitric acid to the unreacted mineral and slows its further oxidation.
References
1.1. Kravchenko N.G. Electrochemical reduction of Mo(VI) at a mercury electrode in HClO₄ and HNO₃ solutions // Abstracts of the Lomonosov Conference, April 9–13, 2012, Moscow. p. 425.
2.2. Khonina I.V., Lumpov A.A., Shadrin A.Yu., Zilberman B.L., Kravchenko N.G. Formation of molybdenum and zirconium precipitates in concentrated uranyl nitrate solutions // Radiochemistry. 2010. Vol. 52, No. 2. pp. 151–154.
3.3. Tarasov A.V., Kuznetsov V.V. Kinetics of Sulfide Concentrate Leaching Processes. Yekaterinburg: Ural Branch of the Russian Academy of Sciences, 1999. 215 p.
4.4. Chanturiya V.A., Pierson V.G. Hydrometallurgical Methods for Processing Refractory Ores and Concentrates. Moscow: Nauka, 2001. 356 p.
5.5. Abramov A.A. Technology for Processing Non-Ferrous Metal Ores. Moscow: Akademiya, 2005. 592 p.
6.6. Habashi F. Extractive Metallurgy of Molybdenum. – Quebec: Laval University, 1997. – 145 p.
7.7. Gupta C. K. Extractive Metallurgy of Molybdenum. – Boca Raton: CRC Press, 1992. – 390 p.
8.8. Maslennikov A.G., Rotmanov K.V., Kravchenko N.G., Kormilitsyn V.M., Peretrukin V.F. Electrochemical Investigation of corrosion and dissolution of metallic technetium and Tc-Ru alloys in 0.5-6.0 M HNO3 // Proceedings of the International Symposium on Technetium and Rhenium - Science and Utilization, July 4-8,2011, Moscow. - P. 95.
9.9. Hiskey J. B., Wadsworth M. E. Kinetics of the oxidation of molybdenite in nitric acid solutions // Metallurgical Transactions B. – 1975. – Vol. 6B. – P. 183–191.
10.10. Zelikman A.N., Korshunov B.G. Metallurgy of Rare Metals. Moscow: Metallurgiya, 1991. 549 p.
11.11. Khasanov A.S., Shodiev A.N., Saidakhmedov A.A., Turobov Sh.N. Investigation of the possibility of recovering molybdenum and rhenium from industrial waste // Mining Bulletin of Uzbekistan. 2019. No. 3. pp. 51–53.




United Kingdom
Germany
France
Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo
Italy
Spain
Poland
Netherlands
Belgium
Sweden
Norway
Finland
Denmark
Switzerland
Austria
Czech Republic
Hungary
Romania
Bulgaria
Greece
Portugal