PLASTIC WASTE MANAGEMENT AND CIRCULAR ECONOMY IN CENTRAL ASIA: BARRIERS, INNOVATIONS AND POLICY PATHWAYS

Authors

  • Rakhimkhonova Diyora M., Sayfullayeva Shirin B. Student, Namangan Branch of KIUT, Namangan, Uzbekistan Author

Keywords:

plastic waste, circular economy, recycling, extended producer responsibility, environmental policy, Central Asia, Uzbekistan.

Abstract

This article analyses the factors that hinder the development of circular plastic waste management in Central Asian countries and the technological, economic and regulatory pathways for overcoming them. Drawing on reports by the OECD, UNEP and the World Bank, international peer-reviewed literature and the legislation of Uzbekistan and Kazakhstan, the topic is examined along four dimensions: collection and sorting infrastructure, recycling technologies and secondary material markets, regulatory and financial instruments, and regional cooperation and monitoring. The analysis shows that plastic waste cannot be addressed through recycling alone; waste prevention, improved product design, stronger separate collection and viable markets for secondary materials must be pursued together. A five-component conceptual framework adapted to regional conditions is proposed, and research and policy priorities for Uzbekistan are identified.

References

1.Borrelle, S. B., Ringma, J., Law, K. L., et al. (2020). Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution. Science, 369(6510), 1515–1518. https://doi.org/10.1126/science.aba3656

2.Ellen MacArthur Foundation. (2016). The New Plastics Economy: Rethinking the Future of Plastics. https://www.ellenmacarthurfoundation.org/the-new-plastics-economy-rethinking-the-future-of-plastics

3.Gazeta.uz. (2025, January 11). Uzbekistan may ban plastic bags starting in 2027. https://www.gazeta.uz/en/2025/01/11/plastic-bags/

4.Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017). The Circular Economy – A new sustainability paradigm? Journal of Cleaner Production, 143, 757–768. https://doi.org/10.1016/j.jclepro.2016.12.048

5.Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7), e1700782. https://doi.org/10.1126/sciadv.1700782

6.Hahladakis, J. N., & Iacovidou, E. (2018). Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity? Science of the Total Environment, 630, 1394–1400. https://doi.org/10.1016/j.scitotenv.2018.02.330

7.Hopewell, J., Dvorak, R., & Kosior, E. (2009). Plastics recycling: Challenges and opportunities. Philosophical Transactions of the Royal Society B, 364(1526), 2115–2126. https://doi.org/10.1098/rstb.2008.0311

8.Jambeck, J. R., Geyer, R., Wilcox, C., et al. (2015). Plastic waste inputs from land into the ocean. Science, 347(6223), 768–771. https://doi.org/10.1126/science.1260352

9.Kaza, S., Yao, L., Bhada-Tata, P., & Van Woerden, F. (2018). What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050. World Bank. https://doi.org/10.1596/978-1-4648-1329-0

10.Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221–232. https://doi.org/10.1016/j.resconrec.2017.09.005

11.Lau, W. W. Y., Shiran, Y., Bailey, R. M., et al. (2020). Evaluating scenarios toward zero plastic pollution. Science, 369(6510), 1455–1461. https://doi.org/10.1126/science.aba9475

12.Leal Filho, W., Saari, U., Fedoruk, M., et al. (2019). An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe. Journal of Cleaner Production, 214, 550–558. https://doi.org/10.1016/j.jclepro.2018.12.256

13.OECD. (2016). Extended Producer Responsibility: Updated Guidance for Efficient Waste Management. OECD Publishing. https://doi.org/10.1787/9789264256385-en

14.OECD. (2022). Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options. OECD Publishing. https://doi.org/10.1787/de747aef-en

15.Ragaert, K., Delva, L., & Van Geem, K. (2017). Mechanical and chemical recycling of solid plastic waste. Waste Management, 69, 24–58. https://doi.org/10.1016/j.wasman.2017.07.044

16.SWITCH-Asia. Plastic Policies in Kazakhstan. EU SWITCH-Asia Programme. https://switch-asia.eu/site/assets/files/4388/plastic_policies_kz.pdf

17.United Nations Environment Programme. (2023). Turning off the Tap: How the World Can End Plastic Pollution and Create a Circular Economy. UNEP. https://doi.org/10.59117/20.500.11822/42277

18.United Nations Environment Programme, International Environmental Technology Centre. (2017). Central Asia Waste Management Outlook. UNEP. https://wedocs.unep.org/20.500.11822/30977

19.Wilson, D. C., Velis, C., & Cheeseman, C. (2006). Role of informal sector recycling in waste management in developing countries. Habitat International, 30(4), 797–808. https://doi.org/10.1016/j.habitatint.2005.09.005

20.World Bank. (2024). Circular Economy as an Opportunity for Central Asia: Summary Report. World Bank. https://openknowledge.worldbank.org/entities/publication/d178b505-008f-479b-81f1-775f27316881

21.O'zbekiston Respublikasi Prezidentining 2019-yil 17-apreldagi PQ-4291-son "2019–2028-yillar davrida qattiq maishiy chiqindilar bilan bog'liq ishlarni amalga oshirish strategiyasini tasdiqlash to'g'risida"gi qarori. https://lex.uz

22.O'zbekiston Respublikasi Prezidentining 2019-yil 30-oktabrdagi PF-5863-son "2030-yilgacha bo'lgan davrda O'zbekiston Respublikasining atrof-muhitni muhofaza qilish konsepsiyasini tasdiqlash to'g'risida"gi farmoni. https://lex.uz

23.O'zbekiston Respublikasining 2002-yil 5-apreldagi 362-II-son "Chiqindilar to'g'risida"gi Qonuni. https://lex.uz

24.Ecological Code of the Republic of Kazakhstan No. 400-VI of 2 January 2021. https://adilet.zan.kz

25.Resolution of the Government of the Republic of Kazakhstan No. 763 of 2021 "On approval of the Rules for the implementation of extended obligations of producers (importers)". https://adilet.zan.kz/eng/docs/P2100000763

Downloads

Published

2026-11-01