THE ROLE OF TECHNOLOGICAL FACTORS IN IMPROVING THE ELECTRICAL PARAMETERS OF SILICON POWER DIODES

Authors

  • Akhmad Zaynidinovich Rakhmatov, Institute of Semiconductor Physics and Microelectronics under the National University of Uzbekistan, Doctor of Technical Sciences, Professor Author
  • Farkhodjon Otabekovich Boboyev PhD doctoral student at the Institute of Semiconductor Physics and Microelectronics under the National University of Uzbekistan, Author

Keywords:

silicon power diode, electrical parameters, technological factors, doping, epitaxial layer, diffusion, ion implantation, thermal treatment, surface passivation, reverse recovery time, breakdown voltage, power losses.

Abstract

This article analyzes the role and significance of technological factors in improving the electrical parameters of silicon power diodes. It examines the influence of the quality of the initial silicon material, doping level, thickness and resistivity of the epitaxial layer, diffusion and ion implantation processes, thermal treatment, surface passivation, and metal contact formation technology on the electrical characteristics of diodes. Furthermore, the physical significance of the main electrical parameters, including forward voltage drop, reverse current, breakdown voltage, reverse recovery time, and reverse recovery charge, is considered. Directions for improving the static and dynamic electrical characteristics of diodes and enhancing their operational reliability through the coordinated optimization of technological processes are substantiated.

References

1.Krishnan N. H., Anandarao N., Yadav V. K., Jayaraman K. N., Sanjeev G. Manufacturing Practices for Silicon-Based Power Diode in Fast Recovery Applications // Journal of Nano- and Electronic Physics, 2011, Vol. 3, No. 1, Part 5, pp. 914–920.

2.Johnsson A., Schmidt G., Hauf M., Pichler P. A Review of Platinum Diffusion in Silicon and Its Application for Lifetime Engineering in Power Devices // Physica Status Solidi (A), 2022, Vol. 219, No. 2, Article 2100462. DOI: 10.1002/pssa.202100462.

3.Hazdra P., Vobecký J., Brand K. Optimum Lifetime Structuring in Silicon Power Diodes by Means of Various Irradiation Techniques // Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2002, Vol. 186, Issues 1–4, pp. 414–418. DOI: 10.1016/S0168-583X(01)00898-9.

4.Cooper R. W. Effects of Carrier Lifetime and End-Region Recombination on the Forward Current and Switching Behavior of Power PIN Diodes // Lifetime Factors in Silicon, ASTM International, 1980. 11 p. DOI: 10.1520/STP35126S.

Downloads

Published

2026-11-07