EXPERIMENTAL STUDY OF THE STRESS–STRAIN STATE OF UNDERGROUND RIGID PLASTIC PIPES UNDER TRENCH CONDITIONS

Authors

  • Radjabov Mansur Rustamovich,Sharipov Shuxrat Po’latovich,Abdimominov Erkin. Karshi State Technical University Associate Professor, Department of General Technical Sciences,Karshi State Technical University Associate Professor, Department of General Technical Sciences,Karshi State Technical University Professor, Department of General Technical Sciences Author

DOI:

https://doi.org/10.5281/zenodo.20339903

Keywords:

HDPE, trench, deformation, radial displacement, ovalization, soil–pipe interaction.

Abstract

Polymer pipes buried underground are widely used in many engineering sectors. However, accurately assessing the stress–strain processes that occur in the pipe wall under trench conditions still remains a complex problem. In this article, HDPE pipes with a diameter of 200 mm were investigated in laboratory conditions based on a trench model. The burial depth was 1.2 m, and the soil had a mixed composition. The variation of radial displacement and ovalization parameters depending on loading was studied. The results showed that the deformation has a nonlinear character and that burial conditions significantly affect the ring stiffness. The obtained data can be used for calibrating numerical models and improving design standards.

References

1.Smith, J. (2019). Underground Plastic Pipes: Mechanics and Design. Springer.

2.Johnson, R. (2020). Plastic Pipe Design and Installation. Elsevier.

3.Brown, D. (2018). Soil–Structure Interaction in Buried Systems. CRC Press.

4.Miller, A. (2017). Ring Stiffness and Deformation of Plastic Pipes. Wiley.

5.Petrov, V. (2021). Engineering of Underground Utilities. MSU Press.

6.Howard, A., & Gumbel, J. (2016). Buried Pipe Design. McGraw-Hill.

7.Watkins, R., & Spangler, M. (2015). Buried Flexible Pipe: Structural Design and Analysis. Iowa State University Press.

8.Ariaratnam, S., & Najafi, M. (2014). Trenchless Technology and Buried Infrastructure. ASCE Press.

9.McGrath, T. (2013). Performance of Thermoplastic Pipes in Soil Environments. Transportation Research Board.

10.International Organization for Standardization. (2018). ISO 11922-1: Thermoplastics pipes — Determination of dimensions and shape. Geneva: ISO.

Downloads

Published

2026-05-22