THEORETICAL SUBSTANTIATION OF THE MAIN PARAMETERS OF THE WORKING BODIES OF THE DEVICE FOR COLLECTING THE FILM BETWEEN THE ROWS OF COTTON
Keywords:
cotton, polymer film, film collecting device, working body, traction force, resistance force, drum diameter, theoretical analysis, mechanization, cotton growing, agrotechnology, energy saving.Abstract
This article discusses the theoretical justification of the main parameters of the working bodies of a device for collecting polymer films laid in the inter-row spaces of cotton. During the study, the technological features of the film assembly process were analyzed, and its interaction with the soil, the resulting traction forces and resistances were studied. Factors affecting the efficiency of the film harvesting process were identified, and optimal operating modes of the working bodies were justified. Also, the effect of the diameter of the collecting drum on the quality of the film winding and the probability of disconnection was theoretically evaluated. Based on the results obtained, scientific recommendations were developed on the selection of constructive and technological parameters of the working bodies of the device. The results of the study will help to increase the efficiency of mechanized harvesting of polymer films used in cotton farming, reduce energy consumption, and ensure environmental safety.References
Mirziyoyev Sh.M. Yangi O‘zbekiston strategiyasi. – Toshkent: O‘zbekiston, 2021. – 464 b. 2. Abduraxmonov I.Y., Murodov B.E. Paxtachilik asoslari va zamonaviy agrotexnologiyalar. – Toshkent: Fan va texnologiyalar, 2020. – 312 b. 3. Mamatov F.M., Ergashev I.T., Ravshanov X.A. Qishloq xo‘jaligi mashinalari. – Toshkent:
Tafakkur Bo‘stoni, 2019. – 456 b. 4. Mamatov F.M., Aldoshin N.V. Agricultural Machines and Technologies. – Tashkent:
Innovation Development Publishing House, 2021. – 398 p. 5. Nartov P.S. Selskohozyaystvennыe mashinы. – Moskva: Akademiya, 2018. – 421 s. 6. Xamidov M.X., Hamidov A.M. Suv tejovchi sug‘orish texnologiyalari va ularning
samaradorligi. – Toshkent: Fan, 2021. – 286 b. 7. Ahmedov A.A., Mamatov F.M. Qishloq xo‘jaligi ishlab chiqarishini mexanizatsiyalash asoslari. – Toshkent: IQTISOD-MOLIYA, 2018. – 340 b. 8. ГОСТ 10354–82. Пленка полиэтиленовая. Технические условия. – Москва: Издательство
стандартов, 2017. – 18 с. 9. ГОСТ 16337–77. Полиэтилен высокого давления. Технические условия. – Москва:
Стандартинформ, 2018. – 22 с. 10. Tursunov O.Q., Mamatov F.M., Berdimurodov P.A. Qishloq xo‘jaligida innovatsion texnika va
texnologiyalar. – Toshkent: Voris-Nashriyot, 2022. – 284 b.




United Kingdom
Germany
France
Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo
Italy
Spain
Poland
Netherlands
Belgium
Sweden
Norway
Finland
Denmark
Switzerland
Austria
Czech Republic
Hungary
Romania
Bulgaria
Greece
Portugal