SUBSTANTIATION OF MAIN PARAMETERS OF A COMBINED DEVICE FOR SHREDDING COTTON STALKS AND COARSE WEEDS SIMULTANEOUSLY WITH PLOWING

Authors

  • S.S. To’rayev Doctoral Candidate, Karshi State Technical University Author

Keywords:

cotton stalk, shredding, plowing, combined device, blade, parameters, Box-Behnken design, Bukhara region.

Abstract

This article examines the scientific substantiation of the main constructive-technological parameters of a combined device for shredding cotton stalks and coarse weeds simultaneously with plowing. The device is mounted on the front of a tractor and receives motion from the NSh hydraulic system. The main research parameters are defined as: number of blades (n), blade diameter (d), rotational torque (F), distance between blades (l), and distance between vertical working columns (L). The research is planned to be conducted under the soil-climatic conditions of the Bukhara region. Based on mathematical modeling and multi-factor experimentation, optimal parameter values have been determined.

References

1. Mushtaq A. et al. Structural analysis of cotton stalk Puller and Shredder Machine // Computers and Electronics in Agriculture. — 2022. — Vol. 201. — P. 107296.

2. Mushtaq A. et al. Field Performance Evaluation and Finite Element Simulation of Cotton Stalk Puller-Shredder // Sustainability. — 2020. — Vol. 12. — P. 3284.

3. Toshpo’latov X.T. Foundations of Mechanization in Agriculture. — Tashkent: Fan, 2019. — 280 p.

4. Zhang B. et al. Calibration and test of contact parameters between chopped cotton stalks using response surface methodology // Agriculture. — 2022. — Vol. 12. — P. 1851.

5. Decree No. PQ-273 of the President of the Republic of Uzbekistan dated June 7, 2022 “On organizing the implementation of tasks set in the Strategy for Agricultural Development for 2020–2030.”

6. Results of an experimental sample test of an advanced perforated deep softener / FU Zhuraev, YZ Rajabov, UY Rajabov, SS Turaev et al. — ACADEMICIA: An International Multidisciplinary Research Journal, 2021.

7. Efficient use of preparation aggregates for planting lands in a single pass with a straightening torsion work / S. To‘rayev. — Conference Proceedings, MCND, 2020.

8. The test laboratory results of a new device for creating hole drainage / ZS Isakov, SS Turaev, FU Juraev. — Conference on Innovative Technologies in Agriculture, 2020.

9. Water-saving technology for intra-soil irrigation of intensive gardens / SS Turaev, GH Arimov, FU Juraev. — Conference: The Role of Young Scientists and Researchers, 2020.

10. Substantiation of technology and equipment for improving the reclamation state of saline soils in irrigated agriculture / FU Juraev, MM Artikova, LB Isayeva, SS Turaev. — The Way of Science, 2014.

Downloads

Published

2026-06-08